AEG Electrolux ARCT IS 82968- G A1, Operating Instructions Manual

Page: 9 / 28

9
AEGE 8183970-00/6
Temperature memory
The temperature memory shows when an alarm has been triggered in the
cabinet.
The temperature memory operates as follows:
When the temperature inside the freezer again falls below -11°C the audible
alarm stops. The temperature display and the red warning lamp will flash to
indicate than an alarm was triggered. When the alarm shut-off button is
pressed, the display then displays the warmest temperature inside the cabinet
during the alarm phase and the display stops flashing. By referring to the
temperature display indication, it is possible to decide whether or not to
discard the products inside the freezer.
However, always check the quality of the food yourself to determine if it can
be frozen or if it must be discarded.
Locking function - The ice
dispenser control panel.
The locking function is activated in
the production plant.
Switching the ice machine on and
off.
The ice machine is switched on in
the production plant and starts up
automatically when the refrigerator
is connected to water and power
supplies. To switch off the ice
machine, press in the button (G) for
about one second. If the ice machine
is switched off, then the cover
supplied should be fitted over the ice
delivery hole in the door.
For temporary unlocking:
Keep the button (J) or (K) pressed in
for about three seconds until the
yellow indicator lamp (I) goes out.
The locking function is re-activated
automatically after about three
seconds.
For permanent unlocking:
Keep the buttons (J) and (K) pressed
in at the same time for about three
seconds. The button (J) or (K) lights
up to indicate unlocking.
I
J N M K L