AEG Electrolux ARCT IS 82968- G A1, Operating Instructions Manual

Page: 22 / 28

22
AEGE 8183970-00/6
Before the refrigerator is taken into
use in its final location, ensure that
the water connection has been
correctly carried out, that there is no
leakage at the connection to the
refrigerator water valve or to the
water tap, and that the four spacers
are properly in position, see the
illustration.
We recommend that the refrigerator is placed on a "run-off" mat intended for
refrigerators and freezers, which makes it easier to detect possible leakage.
This run-off mat is available from your dealer.
When the water system is started for the first time.
The following should be carried out when the refrigerator is correctly
connected to the water supply in the building:
Open the tap on the water connection and start up the refrigerator. The ice
machine starts automatically. Filling with water will start when the
temperature is sufficiently low. Do not use ice produced during the first day
since there is risk of a slight taste.
Electrical cord
Do not remove the power cord by pulling on its lead, particulary when
the product is being pulled out of its niche.
·
Damage to the cord may cause a short-circuit, fire and/or electric shock.
·
In the event of damage to the appliance's main cable, only an authorised
service company recommended by the manufacturer or a similarly qualified
person may adjust it in order to avoid shock hazard for the user.
Electrical connection
Connect the cabinet to a grounded electrical outlet.
Voltage: 230 V.
Fuse: 10 A.
Refer to the rating plate on the left inside the cabinet.