54
aee.com
Precautions for the Waterproof housing
The waterproof housing is a precision component. When using
the waterproof housing, adhere to the following precautions:
1. Do not randomly remove or change the O-ring, key,
and lens cover. Otherwise, the waterproof performance
deteriorates.
2. Do not put the waterproof housing in a place where
corrosive gases are easily generated due to strong acid or
alkali. Do not make the waterproof housing in contact with
chemical or corrosive objects, such as strong acid or alkali.
3. Do not put the waterproof housing in a place where
temperature is high (50°C) or low (-10°C) for a long time to
avoid deformation.
4. Do not expose the MD10 video camera to sunshine
for a long time to avoid deterioration of the waterproof
performance.
5. Before use, ensure that the O-ring is intact, the seal is litter-
free, the housing is fully sealed, and the buckle is tight.
6. After using the housing in sea water, wash it using fresh
water, clean it, and dry it in a cool place.
