5. Connection and Operation
5.1 Connection and operation for 1K(L)1.5k(L)/ 2K(L)/ 3K(L)
1)
Inspection:
Inspect the packaging carton and its contents for damage. Please inform the transport agency
immediately should you find signs of damage.
Please keep the packaging in a safe place for future use.
Note: Please ensure that the incoming feeder is isolated and secured to prevent it from being
switched back on again.
2) Connection:
2.1) UPS Input Connection
If the UPS is connected via the power cord, please use a proper socket with protection against
electric current, and pay attention to the capacity of the socket: over 15A for 1~3K.
2.2) UPS Output Connection
Simply plug the load power cord to the output sockets to complete connection.
Model No.
Output Socket (pcs)
Terminal Block
NST3100010
2
Nil
NST3100020
3+1high current output
Nil
NST3100030
3+1high current output
Nil
NST3100050-L
0
1
NST3100060
0
1
2.3) Computer Connection:
Connect your computer to the outlet sockets of the UPS system following the above diagram.
8
Caution!
*Do not connect equipment which would overload the UPS system (e.g. laser printers)
When installing the electrical wiring, please note the nominal amperage of your
incoming feeder
The system may be installed and wired only by qualified electricians in accordance with
applicable safety regulations!
