14
14
Base Line
Controller
Installation
The BL Controller is an electronic module powered off the switched ignition c12Vdc and supplying the heavy motor current from the +12Vdc battery circuit. The controller
will only function with the ignition key in the ON state. The controller is connected to the spinner motor and vibration motors via a custom wire harness that is designed to
handle the high motor currents. The controller can be mounted under the vehicle dash using mounting hardware that is provided in the kit. The controller is weatherproof and
can be mounted in areas where it will get wet. The controller includes 5 wires as follows:
1.
Ignition wire Blue (power to the controller through switched ignition).
2.
Power wire Red (power to the controller directly from 12V battery).
3.
Output wire White (connects to the spreader motor positive post).
4.
Output wire Green (connects to the option 1 vibrator motor).
5.
Ground wire Black (provides ground for the controller).
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SEE PAGES 6-7 FOR DEFINITIONS
1/2/3/4
5/6/7/8/13/15/16/17
Summary of Contents for Meyer Base Line 240 Series
