15
:: Shocks Build - Bag J - JJ - Step 4
:: Shocks Build - Bag J - JJ - Step 5
:: Shocks Build - Bag J - JJ - Step 3
Use outside
hole in
front arm!
!
Use inside
hole in
rear arm!
!
25612
M3 Locknut,
with flange
(black)
25612
M3 Locknut,
with flange
(black)
89202
M3 x 12mm
BHCS
91445
Shock
Bushing
91445
Shock
Bushing
25189
M3 x 22mm
BHCS
Build x2 (right and left side)
Build x2 (right and left side)
91304
12mm
threaded
collar
91304
12mm
threaded
collar
o-ring
x4
x4
91310
12mm shock
spring cup
(5mm offset)
91636
12mm front
spring (54mm),
White (4.10lb)
91640
12mm rear
spring (72mm),
White (2.40lb)
Front:
11.00mm
Rear:
11.50mm
Build x2 front and x2 rear shocks
Racers Tip:
Use your finger to rub
shock oil on the o-ring for
smoother adjustment!
#91310 12mm Shock Spring Cups
0mm
5mm
9mm
Front Shock: 32.5 wt
Rear Shock: 32.5 wt
Shock fluid
#5432
Step 9-10
Step 8
Step 6-7
Step 4-5
Step 2-3
Shock Bleeding Steps:
1.
Before assembly, get each bleed
screw and thread it 1-2 turns into
the shock cap. This will make it easier
when you are bleeding your shocks.
Remove screw.
2.
Pull shock shaft down.
3.
Fill shock body 3/4 full with silicone
shock fluid.
4.
Slowly move the shock shaft up and
down to remove air from under the
piston.
5.
Wait for bubbles to come to surface.
6.
Fill shock body to top with silicone
shock fluid.
7.
Place a drop of oil in the cap and on
cap threads.
8.
Install cap (without bleed screw) and
tighten completely.
9.
Slowly compress shaft all the way to
bleed excess silicone shock fluid out
the hole in the cap (use rag around
shock to catch excess fluid).
10. Install M2x4mm button head screw
until snug while shaft is fully com-
pressed.
31510
M2 x 4mm
BHCS
91449
Shock Cap
Stroke
Front: 26.0mm
Rear: 35mm
Free Length
Front: 86.25mm
Rear: 103.50mm
Free
Length
Stroke
Shock fluid
#5432
Summary of Contents for RC10SC5M
Page 1: ......
