2
:: Introduction
:: RC10B6 KIT Features
:: Additional
:: Other Helpful Items
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new vehicle. Please take a moment to read through the manual and familiarize yourself with the steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than the illustrations.
New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these sheets before
you start to build.
• 3-gear laydown Stealth™ transmission with lightweight aluminum top shaft
• Gear differential with Factory Team aluminum gear differential cover
• Carbon fiber shock towers and gull-wing front arms with three shock mounting positions
• Reverse bell-crank steering rack design allows more room for electronics
• Hard anodized aluminum pocketed chassis with optional weights available for optimal weight bias
• V2 12mm “Big Bore” threaded aluminum shocks with 3mm TiN coated shafts and low friction x-rings for improved smoothness
• One-piece steering blocks with bolt on Ackermann plates
• Adjustable battery hold-down strap allows weight bias tuning
• Lightweight and durable aluminum C plate and aluminum ball stud mount
• Repositioned A plate provides maximum front end clearance
• Centralized motor positioning for optimum side-to-side balance
• Fore and aft rear shock mounting positions provide additional tuning for available traction
• Updated ball cups and turnbuckles for precise adjustments and durability
• Team Associated clear body and screw-mounted wing by JConcepts
• Factory Team upgraded ball bearings
Your new B6 Team Kit comes unassembled
and requires the following items for completion
(refer to catalog section for suggestions):
• R/C two channel surface frequency radio system
• AA-size batteries for transmitter (#302 alkaline)
• Electronic Speed Control, ESC (#27002)
• Steering servo (#27106, #27107) • R/C electric motor
• Pinion gear (48P), size determined by type/wind of motor
• Battery charger (a peak detection charger, or LiPo compatible charger)
• 2 cell LiPo battery pack (#310, 317, 737, 738)
• Polycarbonate specific spray paint
• Cyanacrylate glue (CA)(#1597)
• Thread locking compound (#1596)
• Tires and Inserts, Fronts and Rears
• Wheels w/12mm Hex
Front Wheels#9690, #9691, #91572, #91573
Rear Wheels #9695, #9696, #91570, #91571
Tools included:
• Allen wrenches 1.5mm, 2.0mm
• #1113 12mm Shock Tool
• Multi-wrench
• Silicone Shock Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part # 1737)
• Reamer / Hole Punch
• Shock Pliers (#1675)
• Wire Cutters
• FT Hex/Nut Wrenches (AE Part # 1519)• Needle Nose Pliers
• Multi Tool (AE Part #7494)
• Hobby Knife
• Soldering Iron
• Calipers or a Precision Ruler • Green Slime shock lube (AE Part # 1105)
Summary of Contents for RC10B6
Page 1: ... 90011 RC10B6 Team Kit ...
