AE Tool Battery Conditioner and Charger
4
AETOOL Instruction Manual
____________________________________________________________________________
4
1.2 Specifications: (Model: BCC 1205 & BCC 1210)
12 V Battery Conditioner and Charger - Technical Data
Model
BCC 1205
BCC 1210
Output Current
5 Amps
10 Amps
Output Voltage
12 Volts DC
12 Volts DC
Minimum Start Voltage
2 .0 VDC
Input Voltage
220 ~ 240 VAC, 50/60 Hz or 110 VAC, 50/60 Hz
Input Power
154 Watts
307 Watts
Current Fuse Rating
250VAC, T 3.15 A
250VAC, T 3.15 A
Charging Control:
Desulphation
Pulse up to 11.0 VDC
Soft Start
Half the rated set current up to 12.0 VDC
Bulk
5.0 A (up to 14.4 V)
10 A (up to 14.4 V)
Absorption
Constant Volt until
Current drops to 0.75A
Constant Volt until Current
drops to 1.5 A
Battery Test
Monitors Voltage for 90 seconds
Recondition
Constant Current 0.75A
up to 16 V for 4 hours
Constant Current 1.5A up
to 16 V for 4 hours
Float
Pulsing at 13.8 VDC
Efficiency
Approximately 85%
Safety
Short circuit protection
Polarity protection
Reverse polarity circuit protected
Non battery link
Circuit protection
Wrong battery type link
Circuit protection
Voltage protection
Trigger at 17.5 VDC
Thermal protection
Trigger at 65
°
C
±
5
°
C
Cooling Fan
Automatic temperature controlled
Ambient Temperature
-20
°
C to +50
°
C, Output is reduced at high temperature.
Battery Range:
Deep Cycle
38 ~ 100 AH
70 ~ 200 AH
Battery Types
Most Lead Acid including GEL, AGM and Calcium
Batteries
Size / Weight:
Dimensions ( LxWxH )
195 mm x 115 mm x 62 mm.
Weight
1.03 kg
1.07 kg