AE Tool Battery Conditioner and Charger
10
AETOOL Instruction Manual
____________________________________________________________________________
10
2.2
Other Precautions:
•
Explosive gases may escape from the battery during charging.
Prevent flames and sparks around the charging area. Provide
adequate ventilation.
•
Before charging, read the instructions carefully.
•
The charger is intended for indoor use. Do not expose to rain.
•
Disconnect the 110V / 220 ~ 240V AC mains supply before
making or breaking the connections to the battery.
•
The battery charger must be plugged into an earthed socket-
outlet.
•
Connection to supply mains is to be in accordance your country
National wiring rules.
•
Use the correct input power current (Amp) fuse rating.
•
Do not attempt to charge non rechargeable batteries.
•
Never charge a frozen battery.
•
If the AC cord is damaged do not attempt to use. It must be
replaced or repaired by a qualified person.
•
Corrosive substances may escape from the battery during
charging and damage delicate surfaces. Store and charge in a
suitable area.
•
Ensure all vehicle accessories including lights, heaters,
appliances etc are turned off prior to charging.
•
This appliance is not intended for use by young children or
persons unfamiliar with the charger unless they have been
adequately supervised by a responsible person to ensure that
they can use the charger safely.
•
Do not attempt to open up the charger; there are no serviceable
parts inside.
•
Young children should be supervised to ensure that they do not
play with the charger.