AE Techron LVC 5050, Quick Start Manual

Page: 9 / 24

E. Power Indicator
This amber indicator lights when the amplifier is connected to AC
power and turned “ON”.
F. Power Switch
This push button is used to turn the amplifier “ON” and “OFF”. When
turned on, the output is muted for about four seconds to protect your
system from start-up transients.
G H
I
J J
K
Back Panel
The following illustration, with captioned call-outs, provides a visual
location of the
LVC 5050 back panel functions.
G. Power Cord
Units set up for 100 to 120 VAC have a 10 AWG, 30 amp line cord,
while units set up for 200 to 240 VAC have a 12 AWG, 20 amp line
cord. North American units set up for 120 VAC, 60 Hz power are
shipped with a grounded 125 volt, 30 amp NEMA TT30P plug; units
shipped outside North America are provided without a plug.
Page 9