Specifications
Specifications are for units in Dual Mode driving both channels into 8-
ohm loads, (26 dB = 20 times voltage gain) and operating from 120
VAC, unless otherwise specified.
“Standard 1 kHz Power" refers to maximum average power in watts at
1 kHz with 0.1% THD.
“Full Bandwidth Power" refers to maximum average power in watts
from 20 Hz to 20 kHz with 0.1% THD.
Performance
Frequency Response:
± 0.1
dB from 20 Hz to 20 kHz at 1
watt.
Phase Response:
±10
from 10 Hz to 20 kHz at 1 watt.
Signal to Noise Ratio:
At 26-dB gain, better than 105 dB (A-
weighted) below full output.
Total Harmonic Distortion (THD):
<0.05% from 20 Hz to 1
kHz, increasing linearly to 0.1% at 20 kHz at full output.
I. M.
Distortion:
<0.05% from 410 milliwatts to full output
at 26-dB gain, with an 8-ohm load.
Slew Rate:
>30 V per microsecond.
Load Impedance:
Rated for 16, 8, 4, 2-ohm use. Safe with
all types of loads, even reactive ones.
Required AC Mains:
60 Hz, 120VAC with 30A service.
Convertible to 100/ 200/208/230/240VAC at 50/60 Hz.
Maximum Load:
250 Volts RMS, no load conditions.
Page 5
Summary of Contents for LVC 5050
Page 23: ...Notes Page 23 ...
Page 24: ...Notes Page 24 ...
