Technical Specifications
Power: DC 12V
Current: 550 mA
Power Consumption: 6.6 W
Video output: 1Vp-p
Output: PAS or NTSC
File Format: JPEG, AVI, MP4, DAT, VOB, MPG
Memory Card: SM, SD, MS, MMC, CF
USB: 2.0
Operation
WARNING!
Turn off Media Player
BEFORE
inserting or removing
a memory card or USB device!
The card and reader may be damaged if you change cards
while the unit is turned on.
Plug in the 12V DC transformer. Connect monitor and speakers using your choice of
video and audio connections.
Move the switch to the right to turn the unit on.
If no picture appears, push the TV/AV/PC button on the remote control to cycle through
the different available input sources.
Menu
The menu controls the operation of the unit. Open the menu using the Menu button on
the remote.
To navigate the menu:
Move Up
Z+
Move Down
Z-
Move Right
R
Move Left
L
Select
SET
Basic Setup
Check the following settings to make sure the unit is set up to play automatically.
1. Under PHOTO SETUP turn THUMBNAIL DIGEST to OFF
2. Under SLIDESHOW SETUP set AUTO START to ON
Preferences
Remove all media cards and USB devices to enter the PREFERENCES part of the menu.
A useful option found in this section is the OSD (On Screen Display) Message on/off
setting.
