VP-8-V2 and VP-16-V2 Series Encoder
·
User Manual
25
properties configured, the camera will synchronize automatically with the time server.
Enable the
NTP
function by checking the checkbox, and configure the following settings:
NTP Server:
IP address of NTP server.
NTP Port:
Port of NTP server.
Interval:
The time interval between the two synchronizing actions with NTP server. It can be set from 1 to 10080
minutes.
Figure 4. 4
Time Sync by NTP Server
If the device is connected to a public network, you should use a NTP server that has a time synchronization
function, such as the server at the National Time Center (IP Address: 210.72.145.44). If the device is set up in a
more customized network, NTP software can be used to establish a NTP server used for time synchronization.
Configuring Time Synchronization Manually
Enable the
Manual Time Sync
function and then click the
icon to set the system time from the pop-up
calendar. You can click the
icon to quickly select the time.
Figure 4. 5
Manual Time Sync
You can also check the checkbox of
Sync. with computer
time
to synchronize the time with the local PC.
Click the
DST
tab page to enable the DST function and set the date of the DST period.
Figure 4. 6
DST Settings
4.
Click the
Save
button to save the settings.
