7
5.
Adjust the monitoring direction of the lens (tighten screws after vertically
adjusting the lens). The lens can horizontally turn by rotating the lens base, as
shown by
in the following figure. After relaxing the fastening screws, you can
vertically turn the lens, as shown by
in the following figure.
6.
Attach the lining and lock it into the buckle on the base. The following shows the
installation instructions of cameras 2-Axis. The linings are different. Please see
the actual products for the differences.
2-Axis:
Lens
base
1
Fastening
screw
2
