Page. 12 of 29
March 2016
Edition 1
PLANAR
- remove glow plug and bushing (use S=27 to hold bushing, and S=12 to turn glow plug
out);
Fig. 3 – Plug with Installation Kit.
-
remove secure screw of CUand dismount it;
-
remove screws fastening AB to heat exchanger and disconnect AB;
-
remove screws fastening screen to CC, remove screws fastening CC to heat
exchanger, remove CC;
4.2. – Dismounting and Disassembly of PLANAR-4DM2
-
remove heater from VEH;
-
remove fastening screws of the plug
cover, remove fastening screws of
casing, remove casing halves;
-
disconnect glow plug connector and
other connectors from control unit;
-
remove fastening screw of the control
unit and dismount it;
-
remove glow plug from bushing and turn
bushing out;
-
removes crews fastening AB to the
intermediate unit and disconnect AB;
-
remove screws fastening the intermediate
unit to the heat exchanger (inside
housing of the intermediate unit) and
remove intermediate unit
-
remove screws fastening CC to heat
exchanger
Fig.4–Glow plug with Installation Kit
.
