30
FR
EN
Connection between generttor-controli ptneli
Connect the control panel to the master device: the key-
board cable, 2m long, must connect the control panel to
the master Induc Stone.
The connection between the master generator and the second is made with an intermediate "male/female"
cable with a length of 105cm.
Electrical connection between the control panel and the master generetor
IMPORTANT:
Electrical connection between master generator and the next units (1,2,3,4 or 5)
The control panel which connects 1, 2, 3, 4 or 5 devices allows identical settings for all devices. It is not possible to
set the devices individually.
NB: Do not ttke into tccount the fltahing of the diaplity if the mtater InducStone hta no
liotd, the choaen aetting lieveli wilili be taaigned to the other connected InducStonea if they
tre liotded.
Connect the BLUE/ BROWN wire on NEUTRAL of the
electric socket.
Connect the GREY/BLACK wire on PHASE of the electric
socket.
Connect the GREEN and YELLOW wire on GROUND of
the electric socket.
Connect your device on the adapted electric socket of
a single-phase network 230 V, 50 Hz.
1.
Connect the male plug of the cable to the female plug of the master generator
2.
Connect the female plug of this same cable to the male plug of the second generator.
3.
With another cable, connect the male plug to the female plug of the second generator and the female
plug to the male plug of the third generator.
4.
Repeat the instructions (3) depending on the number of devices you have.
1
Master generator
2
2nd generator
3
2nd generator
3rd generator
3
