Page: 4
718022
5M Bell Tent instructions
Page: 5
718022
5M Bell Tent instructions
Pitching Instructions
Details on how to pitch your bell tent.
Step 4
Step 5
• Now zip the door shut completely.
• Then start pegging the guy ropes around the side of the
tent as shown in the diagram to the lft.
• You start with any one and move around the circle one at
a time.
• Taking one of the supplied pegs pull out the ropes in a
straight line coming away from the tent, inline with the
seams of the roof (as shown in the diagram to the left).
Ensure enough tension is applied to pull the side wall
vertical and hold the roof tight.
• Once all of the pegs are in, it is now time to adjust the guy ropes (as shown in diagram above) to create
the desired tension. Make sure that the tension all the way around the tent is symmetrical to avoid any
overcompensation. You are aiming for a vertical side wall.
• Place the plastic rain cap on the guide pin of the door ‘A’ frame pole in the doorway (as shown in diagram
above), as this will help reduce any water from entering the tent.
• Your tent should now look crease free and ready for use..
