IMPORTANT INFORMATION
CAUTION: READ ALL INSTRUCTIONS BEFORE USE TO ENSURE CORRECT SETUP.
DO NOT OVER INFLATE. USE A SUITABLE PUMP TO INFLATE. INFLATE TO 7PSI MAXIMUM.
Please read these instructions carefully before attempting to set up your tent and retain
for future reference. If used properly, your tent should provide years of trouble free use.
This tent contains a high proportion of synthetic materials and under certain conditions
will be affected by condensation inside the tent. This should not be confused with leaking.
Condensation can be improved by ensuring adequate ventilation.
This tent is designed for use in light to moderate weather. During strong winds or snowfall
we recommend that you take your tent down. The tent is designed for touring use; it is not
designed for static or commercial use.
We recommend a trial run before setting up your tent for the first time. This will allow you
to familiarise yourself with the tent, its set up and any limitations the tent may have for
your particular use.
AIR PUMP (not included)
We recommend a single action hand
pump with a pressure gauge. This air
tent will require air pressure of 7PSI.
The valve adapter (Boston valve) will
normally be supplied with the pump.
CHOOSING A SITE
Choose a site that is flat and, if possible, protected from the wind. Try to clear
the site of sharp stones to avoid damaging the groundsheet. Avoid pitching
under trees as falling branches, sap, etc could damage your tent.
2
BEFORE USING YOUR TENT
PLEASE CHECK THE CONTENTS
TENT SIZE: (W x D x H)
260cm x 485cm x 190cm
INNER TENT SIZE: (W x D x H)
240cm x 240cm x 175cm
ITEM
QTY
Outer
tent
1
Inner
tent
1
Fiberglass
pole
1
Storage
wall
1
Ground
pegs
21
Guy
ropes
11
Storage
bag
1
Example of a single
action hand pump
with pressure gauge.
Boston valve
adapter
(not included)
(D) 485cm
(W) 260cm
(H) 190cm
