www.AdventistSat.com
Toll Free 866-552-6882
23
Activate Preprogrammed Channels
Press the
STB
button on the remote to
control the
S
et
T
op
B
ox with the universal
remote control.
1.
If required, press
VOL/Right
arrow to select an alternative
2.
language.
Skip this step for default English language
selection.
Press the
MENU
button to open the Installation
screen.
3.
Press
CH/UP
arrow to select
Factory Reset
.
Press
OK
to open the Factory Reset screen.
4.
5.
Do not press OK!
Enter
1010
with the keypad.
6.
This equipment must be activated for the
preprogrammed AdventistSat Television and
Radio Services on satellite AMC4.
When prompted with the on
screen message “Do you want to
7.
load special data?”, select
YES
then press
OK
.
After the 2nd “Wait a Moment” on-screen prompt disappears
the receiver will reset and display a banner across the bottom of the
TV screen for Channel 1, the Hope Channel. The receiver is now
activated.
8.
