31
1. Press and hold the
Pair
button on the Powerline Adaptor C for 3-8
seconds then release, the
PWR
indicator will start flashing.
2. Press and hold the
Pair
buttons on the Powerline Adaptor A and
B for 3-8 seconds then release, the
PWR
indicator will start
flashing.
3. Wait for about 1 minute while your Powerline Adaptors are
connecting. The
PWR
indicator on Powerline Adaptors A, B and
C will stop flashing and will light up solidly when the connection is
made.
Leaving an Existing Powerline AV Network
In this example, the user wants to remove Powerline Adaptor C from the
network.
1. Press and hold the
Pair
button on Powerline Adaptor C for at least
10 seconds. Powerline Adaptor C will reset and restart. (The
PWR
indicator of Powerline Adaptor C will momentarily switch off during
resetting, flash during restart then illuminate steadily.)
2. Wait for the reset to complete.
Resetting the Powerline AV Network
To reset the Powerline Adaptors follow the steps below.
Step
Action
Time / Consequence
1
Press
Pair
Button
10 seconds or more
2
Powerline Adaptor leaves
associated network
Network name is
randomly assigned
3
Powerline Adaptor disconnected
from the network
PLC
indicator
switches off
>
Step 2 must be performed within 2 minutes of step 1.
>
Steps 1 and 2 can be reversed.