19
Rate (Mbps)
Shows the current transmission rate of the Powerline Adaptor (not the
maximum rate of 200Mbps).
Option
Change the corresponding Powerline Adaptor’s name and password by
selecting the device and click the
Modify
button.
Rescan
Button
Click the
Rescan
button to perform an immediate search of the
Powerline Adaptor.
Password
On first use, this is blank.
If a password has been set, this section will show the current password
of the Powerline Adaptor.
When creating a private network, or managing all devices, a password is
required. To set the password, follow the steps below:
1. Select the target device listed in the window.
2. Click
Modify
.
3. Follow the prompts in the pop-up dialogue boxes to complete your
password setting.
The Adaptor will automatically perform the scanning process and update the
display every few seconds by default.
>
The password typically appears as an alphanumeric code, in groups of 4,
separated by dashes and can be found on the back of the Adaptor,
i.e., CNBT-OLEG-IPLK-YPGR.