17
APPeNDIX C -
INSTALLING ThE OpTIONAL GAmE mOduLE (mvGp1)
MVGP1
Installing the mvGp1 Game module
1. Turn the DVD Player over on a surface with protective covering
to prevent scratches.
2. Begin looping the excess MVGP1 Game Module harness under
the protective top plate towards the back of the DVD player as
shown.
3. Place the MVGP1 Game Module onto the mounting standoffs.
4. Locate the two #2.6 x 6mm Phillips Self Tapping Screws in the
ADVEXL12A hardware kit.
5. Using a screwdriver, install the two screws into the two locations
shown.
Note:
Use caution tightening screws as the threads may strip in
the DVD Player.
6. Insert the 8-pin connector of the MVGP1 Game Module harness
into the location shown.
7. Verify Game Module and Game Controllers function properly
(refer to Owner’s Manual).
This section is intended as an installation guide to connect the MVGP1 Game Module to the ADVEXL12A video system.
NOTE:
The MVGP1 Game Module is sold separately and is supplied with its own instruction manual.
Top of ADVEXL12A Video System
Summary of Contents for ADVEXL12A
Page 2: ......
Page 23: ...NOTES 21 ...
Page 24: ... 2016 VOXX ELECTRONICS CORP 180 Marcus Blvd Hauppauge NY 11788 730 101 ...
