Advantek Networks ATV-U700-HD, User Manual

Page: 7 / 73

7
2. Hardware Installation
This chapter explains how to install ATSC hardware device with your PC or Notebook. Please
follow the procedures as described below
2.1 Hardware Installation Procedure
Connect USB connector of the ATSC Receiver to the USB port of your computer or notebook.
2.2 Hardware Connection Diagram
Connect supplied ATSC antenna to the MCX connector on the backside of the ATSC
Receiver with supplied Adapter (MCX to F Jack).
Note:
(1) If you install the ATSC Receiver with Notebook, please make sure the “ Power Saving ”
function is turned OFF . (The “Power Saving” function will lower down the CPU
performance and may effect the ATSC Receiver’s operation).
(2) Be sure to connect the antenna to the ATSC Receiver and adjust it to a better reception
angle and location every time you play with the Receiver.