Advantek Networks APS-U3100 User Manual Download Page 43

Page: 43 / 69

6. Network Print Monitor

Preparation

The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows 95/98/Me.

Please make sure that the following steps have been completed before proceeding with

installation under Windows PC.

Select A Desired Protocol

TCP/IP

The TCP/IP Protocol must be installed. For further information, please read “TCP/IP Protocol

Installation” section in this chapter.

Note:

If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print server”

section later in this chapter.

IPX/SPX

The IPX/SPX-compatible Protocol must be installed. For further information, please read

“IPX/SPX-compatible Protocol Installation” section in this chapter.

NetBEUI

The NetBEUI protocol must be installed. For further information, please read “NetBEUI Protocol

Installation” section in this chapter.

TCP/IP Protocol Installation

1. Click Start, point to Settings and select Control Panel.

2. Double click the Network icon.

3. If the TCP/IP Protocol is not already installed, click Add.

4. Select Protocol and click Add.

5. Select Microsoft from the Manufacturers list.

6. Select TCP/IP Protocol from the Network Protocols list.

7. Specify an IP address, Subnet Mask, and Gateway address or specific “Obtain IP address

automatically”, if a DHCP server is available on the LAN.

8. Restart the computer.

9. Done.

Note:

Using TCP/IP protocol to access the print server requires well-configured TCP/IP settings.

If you are not familiar with these settings, please consult your network administrator for

details or ask for help.

Summary of Contents for APS-U3100






































































Search results

Summary of Contents for APS-U3100

Reviews:

Related manuals for APS-U3100

Brands by name

Popular brands

Advantek Networks APS-U3100, User Manual

Search results

Summary of Contents for APS-U3100

Reviews:

Related manuals for APS-U3100

Brands by name

Popular brands