Advantech WISE-5580, User Manual

Page: 29 / 50

21 WISE-5580 User Manual
Chapter 3
Initial Setup
3.3 Mounting
3.3.1 Attaching the WISE-54XX left-hand-side module (option)
Left-hand-side PCIe module should be assembly before mount on the DIN-rail.
Please follow below steps and diagram to install.
Step1: Use the guide pin to direct the module in the right position.
Step2: Push the golden finger into the slot
Step3: Screw in the screws to make sure the combination is tight,
Step4: Follow the same step to stack 2nd and next WISE-54XX module
3.3.2 Permissible installation positions
Note: The CPU module may overheat if the installation position is incorrect or mini-
mum distances are not adhered.
WISE-5580 is with passive cooling system, and need correct mounting position to
ensure optimum heat dissipation.
Note the below requirements for the control cabinet:
1. Please make sure the temperature of control cabinet is within the operation tem-
perature of WISE-5580, which is -10~60 °C
2. Please adhere to the minimum clearance of 50 mm above and below the CPU
module, in order to ensure proper ventilation
3. Additional equipment or select suitable control cabinet enclosure to ensure the
heat can be dissipated from the control cabinet
Figure 3.1 Mounting position for WISE-5580
Toward
Ground
5cm
5cm