Advantech WISE-5580, User Manual

Page: 28 / 50

WISE-5580 User Manual 20

Install USB device in the internal USB2.0 port
WISE-5580 reserves one port inside the chassis for important USB device. This
design can keep user's important property inside the chassis and it would be not
as easy to remove as it is outside the chassis. The USB device could be:
– USB dongle key for software
– Extra USB storage for data

Jumper/DIP switch settings for special functions
Below is the SW5 function
Jumper ERR_LOGIC1
This jumper is to set the relay for power alarm output
Type Lithium Carbon-Monoflouride
Size BR2032
Operation Temperature -40 °C to +85 °C
Advantech Part Number 1750199011
DIP Function Status
1
Power for USB1&2
in standby mode
ON : USB supply 5V
OFF : None (default)
2
Power for USB3&4
in standby mode
ON : USB supply 5V
OFF : None (default)
3 VGA force output
ON : No output load
OFF : Simulate output load (default)
4 Power AT mode
ON : Hardware AT mode
OFF : Simulated AT mode (default)
Position of Jumper Status
PIN 1-2 short Normal Open
PIN 2-3 short Normal Close