7
APAX-5000 I/O Series User Manual
Chapter 2
H
ardware
Installation
2.1.2
Remove from the DIN-rail
You can easily detach the module by release the latch at the bottom of the module. Then
you can draw out the module without any difficulty.
Figure 2.2 Release the latch to remove the module
Figure 2.3 WISE-5000 slice I/O module design
2.2
I/O Wiring
WISE-5000 I/O modules leverage detachable clamp type terminal blocks. Comparing
with traditional screw type terminal blocks, clamp type terminal blocks can save wiring
time and provide better reliability for shock and vibration. Follow the procedures below for
wiring your WISE-5000 I/O module.
1.
Use the screw driver to press the left notch on the terminal.\
2.
Insert the wire into the terminal.
Note!
Please use # 14 AWG ~ 28 AWG wire for terminal block.
Summary of Contents for WISE-5000 Series
