Appendix A Display Timing Mode and OSD
15
A.1 Supported Input Timing Modes
The nineteen kinds of timings below are already programmed in this
module. The input synchronous signals are automatically recognized.
Table A.1: Supported Input Formats
Note 1: Even if the preset timing is entered, a little adjust-ment of the
functions such as Horizontal period, CLK-delay and display
position, are required. The adjusted values are memorized in
every preset num-ber.
Note 2: This module recognizes the synchronous signals with near
preset timing of the frequency of the HS and Vsync, even in
the case that the signals other than the preset timing that
were entered.
Note 3: Because adjustments may not fit, such as differing magnifying
ratios or, in the case that you use it except for the display
timing that was preset.
Vertical Frequencies
Resolution
56 Hz
60 Hz
70 Hz
72 Hz
75 Hz
640 x 480
Yes
Yes
Yes
800 x 600
Yes
Yes
Yes
Yes
1024 x 768
Yes
Yes
Yes
