2 USB-5801 Startup Manual
•
Total Harmonic Distortion Plus Noise (THD+N):
-91 dB
•
Trigger Mode:
Start, delay start, stop, delay stop
•
Automatic Calibration:
Yes
Tachometer Input
•
Channels:
2
•
Input Voltage:
Logic 0: 3 V max.
Logic 1: 10 V min. (30 V max.)
•
Input Frequency:
5 kHz max.
•
Digital Filter:
16 μs ~ 131 ms
•
Isolation Protection:
2,500 V
DC
Digital Input
•
Channels:
4
•
Input Voltage:
Logic 0: 3 V max.
Logic 1: 10 V min. (30 V max.)
•
Opto-Isolator Response Time:
100 μs
•
Digital Filter:
16 μs ~ 131 ms
•
Isolation Protection:
2,500 V
DC
Digital Output
•
Channels:
4
•
Load Voltage:
5 ~ 40 V
DC
•
Load Current:
350 mA/ch (sink)
•
Opto-Isolator Response Time:
100 μs
•
Isolation Protection:
2,500 V
DC
General
•
Interface:
USB 3.0
•
Data Transfer Rate:
5 Gbps
•
Connectors:
6 x BNC (AI and AO)
2 x 10-pin, 3.81-mm terminal blocks (tachometer, trigger,
and DI/O)
2 x 3-pin, 3.81-mm terminal blocks (power)
1 x USB 3.0 type A (downstream port)
1 x USB 3.0 type B (upstream port)
•
Dimensions:
168 x 120 x 40 mm (6.6 x 4.7 x 1.6 in)
•
Operating Temperature:
0 ~ 60 °C (32 ~ 140 °F)
•
Storage Temperature:
-40 ~ 70 °C (-40 ~ 158 °F)
•
Storage Humidity:
5 ~ 95% RH (non-condensing)
•
Power Supply:
External 10 ~ 30 V
DC
or USB bus power
•
Power Consumption:
150 mA typ./200 mA max. @24 V external power
700 mA typ./860 mA max. @5 V bus power
Specifications (Cont.)
We recommend installing the driver before installing the
USB-5801 module to guarantee problem-free installation.
The Advantech DAQNavi Device Drivers setup program
for the USB-5801 module can be downloaded from the
Advantech website (www.advantech.com). Follow the steps
outlined below to install the driver software.
1. Execute the USB-5801 driver package.
2. The driver installation program should be launched.
When the setup program is launched, a setup screen
will be displayed.
3. Click the “Next” button and wait for driver installation.
4. Click the “Finish” button to exit the setup program.
After the device drivers are installed, the USB-5801 module
can be installed in the computer. We recommend referring
to the user manual or related documentation for detailed in-
structions. Alternatively, follow the steps outlined below for
module installation.
1. Touch any metal surface of the computer to discharge
any static electricity that may be in your body.
2. Insert the USB module into the designated USB port.
Use caution when inserting the module to avoid damage
due to excessive force.
After the module is installed, the device can be configured
using the Advantech Navigator Program automatically in-
stalled during driver setup. Complete device installation pro-
cedures should include device setup, configuration, and test-
ing. Information is provided in the following sections to guide
users through the device setup, configuration, and testing.
Hardware Installation
Driver Installation
