Advantech UNO-420, User Manual

Page: 27 / 42

17 UNO-420 User Manual
C
ha
pte
r 3
In
itia
l S
etu
p
9. Go to Device Manager and check if COM port sequence been modified suc -
cessfully
10. Reboot the system.
3.6 AMI BIOS Setup
1. Introduction
With the AMI BIOS Setup program, you can modify BIOS settings and control the
special features of your computer. The Setup program uses a number of menus for
making changes and turning special features on or off. This chapter describes the
basic navigation of the UNO-420 setup screens.
2. Entering Setup
Press the
Del
or
Esc
. key during the Power On Self Test (POST) process to enter the
BIOS setup screen, otherwise the system will continue the POST process.