manualshive.com logo in svg

Advantech UNO-3072A, User Manual

Share
Download
Advantech UNO-3072A User Manual Download Page 2

UNO-3072A/3074A User Manual

ii

Copyright Notice

The documentation and the software included with this product are copy-
righted 2011 by Advantech Co., Ltd. All rights are reserved. Advantech 
Co., Ltd. reserves the right to make improvements in the products 
described in this manual at any time without notice. No part of this man-
ual may be reproduced, copied, translated or transmitted in any form or 
by any means without the prior written permission of Advantech Co., Ltd. 
Information provided in this manual is intended to be accurate and reli-
able. However, Advantech Co., Ltd. assumes no responsibility for its use, 
nor for any infringements of the rights of third parties, which may result 
from its use.

Acknowledgements

IBM, PC/AT, PS/2 and VGA are trademarks of International Business
Machines Corporation.
Intel® and Pentium® are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of
Microsoft Corp.
C&T is a trademark of Chips and Technologies, Inc.
All other product names or trademarks are properties of their respective 
owners.

Part No. 2003307420

1st Edition

Printed in Taiwan

May 2011

Summary of Contents for UNO-3072A





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands