Advantech UNO-3072A, User Manual

Page: 13 / 84

3 Chapter 1
• USB Interface:
External:Four USB ports, USB EHCI, Rev. 2.0 compliant
Internal: One USB port, USB EHCI, Rev. 2.0 compliant
(Optional cable wiring: 2 x USB ports, USB EHCI, Rev 2.0 compliant)
• IEEE 1394 Interface: 2 x IEEE 1394 type B with Bilingual connectors
• Compact Flash Slots: Two type I/II CompactFlash Slots, One internal
and one external
• HDD: SATA HDD extension kit for two standard 2.5" HDDs
RAID 0/1 function support
One external eSATA device (Does not support hot swap)
• LEDs: Power, Standby, HDD, Alarm for battery backup,
4 COM ports Tx /Rx, LAN (Active, Status)
( Optional: 4x Programmable LED while COM ports Tx/Rx disable)
• PCI-bus Slot Power: 12 V @ 3 A
-12 V @ 0.8 A
5 V @ 6 A
3.3 V @ 6 A
3.3 VSB @ 1.5A
Note: Total power total combined power consumption on the PCI slots
should be less than 20W
• 4-ch Isolated Digital Input (Wet Contact, DI0~DI3)
1,500 V
DC
isolation
1,500 V
DC
ESD protections
50~70 V
DC
over-voltage protection
50 V
DC
input range and 3 kHz speed
Input Voltage Range:
Dry Contact: Logic level 0: open
Logic level 1: close to GND
Wet Contact: Logic level 0: -3V ~ +3V
Logic level 1: +10 ~ 50 V, -10 ~ -50V
• 4-ch Isolated Digital Output (DO0~DO3)
- 1,500 V
DC
isolation and 200 mA max / channel sink current
- 2 options after hot reset: Reset all digital output or keep last status
- 5~ 40 V
DC
output range to open collector and 3 kHz speed
• Two 16-bit Counters/Timers:
Counter source: DI1 & DI3, Pulse output: DO2 & DO3
Can be cascaded as one 32-bit counter/timer
Down counting, preset counting value