UNO-2372G-J1 User Manual
28
A.11
SATA Power Wafer Box (CN9)
A.12
Micro SIM Card Connector (CN10)
Table A.12: RS-485 COM Port Connector Pin Assignment
Pin
Name
Type
Rail
Description
1
SATA Power Power
5V
SATA Power Output
2
GND
Power Ground
3
GND
Power Ground
4
N.C.
Not Connected
Table A.13: Micro SIM Card Connector Pin Assignment
Pin
Name
Type
Rail
Description
C1
UIM_PWR O
CMOS 3.3V
Power source for the UIM.
Compliant to the ISO/IEC 7816-3 specification
(VCC).
C2
UIM_RESET O
CMOS 3.3V
UIM reset signal.
Compliant to the ISO/IEC 7816-3 specification
(RST).
C3
UIM_CLK O
CMOS 3.3V
UIM clock signal.
Compliant to the ISO/IEC 7816-3 specification
(CLK).
C5
GND
Return current path.
C6
UIM_VPP O
CMOS 3.3V
Variable supply voltage (e.g., programming volt
-
age) for class A devices. Refer to ISO/IEC 7816-3
for operating class definitions.
This signal is reserved for future use for devices of
other classes.
Compliant to the ISO/IEC 7816-3 specification
(VPP).
C7
UIM_DATA I/O
CMOS 3.3V
UIM data signal.
Compliant to the ISO/IEC 7816-3 specification (I/
O).
