Advantech UNO-2050 User Manual Download Page 32 | Manualshive

Page: 32 / 54

background image

2 4

UNO-2050 User's Manual

2.7

LAN: Ethernet Connector

The UNO-2050 is equipped with two Realtek RTL8139C Ethernet LAN
controller that is fully compliant with IEEE 802.3u 10/100Base-T
CSMA/CD standards. The Ethernet port provides a standard RJ-45
jack on board, and LED indicators on the front side to show its Link
(Yellow LED) and Active (Green LED) status. Please refer to A.4 for its
pin assignments.

2.8

Power Connector

The UNO-2050 comes with a Phoenix connector that carries 9 ~ 36 V

DC

external power input, and features reversed wiring protection. There-
fore, it will not cause any damage to the system by reversed wiring of
ground line and power line. Please refer to A.5 for its pin assignments.

2.9

LED Indicators

There are two LEDs on the UNO-2050 front panel for indicating system
status: PWR LED is for power status and IDE LED is for IDE bus
status.

2.10 PS/2 Keyboard and Mouse Connector

The UNO-2050 provides a PS/2 keyboard and PS/2 mouse connector.
A 6-pin mini-DIN connector is located on the panel of the UNO-2050.
The UNO-2050 comes with an adapter to convert from the 6-pin mini-
DIN connector to two 6-pin mini-DIN connectors for PS/2 keyboard
and PS/2 mouse connection. Please refer to Appendix A.6 for its pin
assignments.

«
...
30
31
32
33
34
...
»

Summary of Contents for UNO-2050























































Reviews:

No comments

Related manuals for UNO-2050

Brand: Waters Pages: 55

Brand: Paradox Pages: 2

Brand: Eaton Pages: 2

Brand: Eaton Pages: 2

Brand: Eaton Pages: 8

Brand: National Instruments Pages: 2

Brand: U-Prox Pages: 3

Brand: U-Prox Pages: 25

Brand: U-Prox Pages: 2

Brand: Ublox Pages: 2

Brand: u-blox Pages: 19

Brand: ValvTechnologies Pages: 20

sensoCOMFORT VRC 720/3

Brand: Vaillant Pages: 64

Brand: Partizan Pages: 7

Pulsafeeder MPC Vector

Brand: Idex Pages: 114

Brand: TEL Pages: 26

Brand: Vimar Pages: 32

TRIO MPC-165 Series

Brand: Sutter Instrument Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands