UNO-1150 User Manual
26
3.7 DIN-rail Mounting Setup
Please follow the below steps to mount the UNO-1150 on the DIN-Rail.
1.
Screw the provided DIN-Rail Kit on the rear side of UNO-1150 as
the diagram shown below.
2.
Hang the UNO-1150 to the DIN-Rail with angle of inclination
about 30 degree.
3.
Let UNO-1150 down straight to slide over the Rail smoothly.
Note: To get the UNO-1150 down from the Rail, push the
device top to down then pull the bottom of the device to
let it off the Rail smoothly.
