Automatic
Sliding Door
Install device in the middle and keep a
20-60 cm distance from the door.
Rotation Door
Install device in the middle and keep a
20-40cm distance from the door.
Push/Pull Inward
Opening Door
Install device in the middle and keep a
distance greater than the door width.
Install here
UCAM-120 Counting Camera
Quick Device Installation Guide V1.0
Pre-installation Guide
Supported Height of Installation
2.5m
–
5m
Supported Tile Angle
-10°
–
10°
Front Side
Reverse Side
Mount The Device
Recessed
Mounting
Use bundled recessed mounting bracket for mounting. Insert device with its signal light s facing the bracket
and grip it with two swiveling clamps.
Install Device On Site
Install one single device when the entrance width is not greater than 3.2m.
Single Device
Avoid Exist sign and
any obstacles like air
curtain.
Install here
Step1: Where to install the device?
Step2: How to Install?
Follow
Step1
to
decide the best
position. Drill a
hole using a
hole saw.
Follow
‘Mount The
Device’
to mount TD
sensor into the
bracket and connect
Ethernet cable from
the reverse side.
Insert the
mounted device
into the hole
opened. Fix it
with screws with
front side
downward facing.
www.ushop-plus.com
