TREK-755/TREK-756 User Manual
20
3.4 Installing the Universal Arm
1.
Press latches at the same time and then rotate support-1 until you
can see both of the screw holes.
2.
Rotate support-2 until the angle is the same as support-1.
3.
Use four M4x8L screws and attach the U-Arm with the TREK-755/
TREK-756. The 4 stainless screws can be found in the universal
arm's box.
4.
Use the latches to adjust the angle of TREK-755/TREK-756
through 360° in 14.4° steps.
Note: Support-1 can be on the right or left.
Figure 3.2: Universal Arm
TREK-755/TREK-756
Support-2
Support-1
Latch
Screw-M4x
8
L
(x4)
Summary of Contents for TREK-755
