manualshive.com logo in svg

Advantech TPC-870, User Manual

Share
Download
Advantech TPC-870 User Manual Download Page 58

TPC-870 User Manual

46

B.2  How to Use the Control Code

There are 6 control codes for the operation codes in the WDT driver.

IOCTL _WDT_ENABLE:

Enables the Watchdog timer on your application. By default, if the 
Watchdog timer is enabled, the WDT driver will automatically trigger 
itself after the specified period and your application does not need to trig-
ger the Watchdog timer in this situation.
lpInBuffer : unused.
nInBufferSize: unused.
lpOutBuffer: unused.
nOutBufferSize: unused.

IOCTL _WDT_DISABLE:

Disables the Watchdog time on your application.
lpInBuffer : unsed.
nInBufferSize: unused.
lpOutBuffer: unused.
nOutBufferSize: unused.

IOCTL_WDT_STROBE:

Triggers the Watchdog. If your application uses IOCTL_WDT_ENABLE 
to enable the Watchdog first and then sends IOCTL_WDT_REBOOT to 
the WDT driver, your application must trigger the Watchdog once during 
the Watchdog timer period. If your application has not triggered at the 
specified period, the device will reboot automatically.
lpInBuffer: unused.
nInBufferSize: unused.
lpOutBuffer: unused.
nOutBufferSize: unused.

Summary of Contents for TPC-870





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands