manualshive.com logo in svg

Advantech TPC-870, User Manual

Share
Download
Advantech TPC-870 User Manual Download Page 28

TPC-870 User Manual

16

Chapter 4  

Software Configuration

A support CD-ROM for TPC-870 is available and along with the product.  
There are related utilities and drivers for TPC-870 included.  Please 
install the Chipset INF driver, VGA graphics driver, LAN driver, audio 
driver, Advantech.com driver,

 

Touchscreen driver and Watchdog Timer 

(WDT) driver sequentially.

4.1  Utilities & Drivers

The following utilities and drivers are provided for TPC-870. You can 
also find the updated utilities and drivers from the support website.

4.1.1 Intel Chipset Software Installation Utility

Path: \TPC-870H\Driver\INF\English (for English version) 

\TPC-870H\Driver\INF\Multilanguage (for Multilanguage)

Available for the OS’s below:

•  Microsoft Windows 2000
•  Microsoft Windows XP

4.1.2 VGA Drivers (Intel(R) Graphics Driver)

Path: \TPC-870H\Driver\VGA\
Available for the OS’s below:

•  Microsoft Windows 2000
•  Microsoft Windows XP

4.1.3 Intel PRO Network Drivers/software

Path: \TPC-870H\Driver\LAN\
Available for the OS’s below:

•  Microsoft Windows 2000
•  Microsoft Windows XP

    

Summary of Contents for TPC-870





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands