Advantech TPC-1881WP Series, User Manual

Page: 23 / 50

TPC-XX81WP
User Manual
15
2.3 Cabinet Installation Guide
Follow the steps below to complete the installation. The earth ground to TPC is strongly sug-
gested for the system reliability like EMC, surge, etc.
1. Embed the TPC into the cabinet.
Step A:
Connect the cabinet to earth ground.
Step B:
Embed the TPC into the cabinet without any I/O cable and power.
2.
System wiring
Step A: Connect the cabinet to earth ground.
Step B: Ensure that all cabinet has been grounded together.
Step C: Connect the ground of the power supply to the cabinet.
Step D: Connect the ground pin of the TPC to the cabinet.
Step E: Connect the I/O to the controller if needed.
Step F: Connect the V+ and V- of power supply to the TPC.
While completing step A to F step by step, you can supply power to the TPC now.
Note! Make sure all wires follow the installation guidelines or it may cause
issues.
Ch
ap
ter
2
S
y
s
tem
Se
tup