Advantech TPC-1270 User Manual Download Page 28

Page: 28 / 86

TPC-1270 User Manual

Chapter 4

Software Configuration

A support CD-ROM for TPC-1270 is available and along with the prod-
uct. There are related utilities and drivers for TPC-1270 included. Please
install the Chipset INF driver, VGA graphics driver, LAN driver, audio
driver, Advantech.com driver,

Touchscreen driver and Watchdog Timer

(WDT) driver sequentially.

4.1 Utilities & Drivers

The following utilities and drivers are provided for TPC-1270. You can
also find the updated utilities and drivers from the support website.

4.1.1 Intel Chipset Software Installation Utility

Path: \TPC-1270H\Driver\INF\English (for English version)

\TPC-1270H\Driver\INF\Multilanguage (for Multilanguage)

Available for the OS’s below:

• Microsoft Windows XP

4.1.2 VGA Drivers (Intel(R) Graphics Driver)

Path: \TPC-1270H\Driver\VGA\
Available for the OS’s below:

• Microsoft Windows XP

4.1.3 Intel PRO Network Drivers/software

Path: \TPC-1270H\Driver\LAN\
Available for the OS’s below:

• Microsoft Windows XP

4.1.4 Advantech COM Driver

Path: \TPC-1270H\Driver\Advantech COM\
Available for the OS’s below:

• Microsoft Windows XP

Summary of Contents for TPC-1270























































































Search results

Summary of Contents for TPC-1270

Reviews:

Related manuals for TPC-1270

Brands by name

Popular brands

Advantech TPC-1270, User Manual

Search results

Summary of Contents for TPC-1270

Reviews:

Related manuals for TPC-1270

Brands by name

Popular brands