Advantech SOM-5871, User Manual

Page: 18 / 104

SOM-5871 User Manual 10
1.3.10.4 USB 3.1 Gen2
1.3.10.5 USB 3.1 Gen1
1.3.10.6 USB 2.0
1.3.10.7 SPI Bus
Supports BIOS flash only. SPI clock can be 50MHz, 33MHz, or 20MHz, capacity up
to 16MB.
1.3.10.8 GPIO
8 x programmable general purpose Input or output (GPIO).
1.3.10.9 Watchdog
Supports multi-level watchdog time-out output. Provides 1-65535 level, from 100ms
to 109.22 minutes interval.
1.3.10.10 Serial port
2 ports, 2-wire serial port (Tx/Rx) support 16550 UART compliance.
 Programmable FIFO or character mode.
 16-byte FIFO buffer on transmitter and receiver in FIFO mode.
 Programmable serial-interface characteristics: 5, 6, 7, or 8-bit character.
 Even, odd, or no parity bit selectable.
 1, 1.5, or 2 stop bit selectable.
 Baud rate up to 115.2K.
1.3.10.11 TPM
Supports TPM 2.0 module by default.
1.3.10.12 CAN Bus
Supports CAN Bus function as optional function by BOM change (co-layout with
COM 2).
Note! To meet USB3.1 Gen2 performance, strongly recommend to use the
certificated cable.
Type 6 P0 P1
SoC P0 P1
Type 6 P2
SoC P2
Type 6 P0 P1 P2 P3 P4 P5 P6 P7
SoC P0 P1 P2 P3 P4 P5 P6 P7
Type 6 OC_01 OC_23 OC_45 OC_67
SoC USB_OC# OC_01 OC_23 OC_45 OC_67