START GUIDE
First Use
Before applying power to the router, connect the components that you required for your
applications. You cannot operate the router without connected antenna, inserted SIM card,
nor connected power supply.
If you do not have connected main antenna during operation of the router, the router can
be damaged!
1. Antenna
Use a SMA connector to connect the antennas to the router. The main antenna is con-
nected to the router by screwing on the
ANT
connector (see the figure below). A second
diversity antenna can also be connected to the
DIV
connector to improve performance.
2. SIM card
The SIM card readers, for 3 V and 1.8 V SIM cards, are located on the rear panel of the
router. If you intend to use this device to communicate over a cellular network, please place
an activated data-provisioned SIM card with an unblocked PIN into the SIM card reader. Push
your SIM card into the
SIM1
(or
SIM2
in case of the SmartStart router
SL304
) slot until it clicks
in place.
Before handling of the SIM card disconnect the router from power supply!
2
QSG issued in CZ, May 10, 2016
