Advantech SmartFlex Series, Start Manual

Page: 20 / 20

SmartMotion
Configuration
1. Configuring the Device Using the Web Browser
You can access the router for status monitoring, configuration, and administration after
entering the IP address of the router into the web interface. The default router IP address is
192.168.1.1 (netmask 255.255.255.0). Configuration access is allowed for the user "root". The
default password is printed on the router’s label.
3
Attention, it is necessary to use HTTPS
protocol for secure communication over a network! For a detailed description and exam-
ples of the router configurations, see the Configuration manual.
2. Restoring and Backing up the Router Configuration
After you reset the router, the current configuration is overwritten by the default settings.
We recommend that you back up the router configuration before resetting the device. Refer to
the Configuration manual for more information.
When the PWR LED starts blinking, it is possible to restore the default configuration of the
router by pressing the RST button on the rear panel. After pressing this button, the default
configuration is restored and then the router reboots (green LED will be on).
Important Notes
After logging on to the device for the first time, we strongly recommend changing the
default password due to security reasons. Simultaneously, you will gain access to all
functions of the router.
For security reasons, it is highly recommended to update the firmware of the router to the
latest version regularly. Downgrading the firmware to an older version than the production
version or uploading a firmware intended for a different device may cause the malfunction
of the device.
Documentation
User’s Manual and Configuration Manual for the router can be found and downloaded on
this web site: www.advantech-bb.cz/download
Hereby, Advantech Czech s.r.o. declares that the radio equipment type SmartMotion
ST352 and ST355 is in compliance with Directive 2014/53/EU .
The full text of the EU Declaration of Conformity is available at the following internet address:
www.advantech-bb.cz/eudoc
3
If the router’s label does not contain a unique password, use the password "root".
QSG-0002-EN, January 24, 2020 19 Released in the Czech Republic