Advantech SmartFlex Series, Start Manual

Page: 9 / 20

SmartStart
When the
PWR
LED starts blinking, it is possible to restore the default configuration of the
router by pressing the RST button on the rear panel. After pressing this button, the default
configuration is restored and then the router reboots (green LED will be on).
Important Notes
After logging on to the device for the first time, we strongly recommend changing the
default password due to security reasons. Simultaneously, you will gain access to all
functions of the router.
For security reasons, it is highly recommended to update the firmware of the router to the
latest version regularly. Downgrading the firmware to an older version than the production
version or uploading a firmware intended for a different device may cause the malfunction
of the device.
Documentation
User’s Manual and Configuration Manual for the router can be found and downloaded on
this web site: www.advantech-bb.cz/download
Hereby, Advantech Czech s.r.o. declares that the radio equipment type SmartStart
SL304 is in compliance with Directive 2014/53/EU .
The full text of the EU Declaration of Conformity is available at the following internet address:
www.advantech-bb.cz/eudoc
QSG-0002-EN, January 24, 2020 8 Released in the Czech Republic