RSB-6410 Android User Manual
42
Test RSB232
UART2 Test RSB422
UART2 Test RS485
RSB-6410 only support one RS485 port, please find another device that supports
RS485 port and connect to COM3 using the Serial Port Tool from 4.8 Serial Port Test.
# AutoRun_uart232
=====test rs232!=====
rs232 number: 5
/dev/ttymxc1 PASS!
/dev/ttymxc2 PASS!
/dev/ttymxc3 PASS!
/dev/ttymxc4 PASS !
+--------------------+
| [RS232] Test Pass!|
+--------------------+
Note!
Only UART2 supports RSB232/RSB422/RSB485, test rsb232 mode,
please jump rsb232 mode, you can refer to detailed jump information
from the 2.1.2 Jumper List.
# AutoRun_uart422 -p /dev/ttymxc2 -t 1 -s 115200
==========test RS422============
Open uart /dev/ttymxc2 PASS ....
->Writing : hello world!
->Reading : hello world!
->TX/RX Signal pass
+--------------------------+
| UART RS422 Testing PASS |
+--------------------------+
Note!
UART2 Jump RSB422 mode and Connect to loopback, you can refer to
detailed jumper information in the 2.1.2 Jumper List.
Note!
COM3 Jump RS485 mode, you can refer to detailed jumper information
in the 2.1.2 Jumper List.
