![background image](http://html.mh-extra.com/html/advantech/rr75i-v2/rr75i-v2_user-manual_2858111020.webp)
RR75i v2
5.8.1
Status indication
About router status inform eight LED indicators on the front panel and on every port are
two LED indicators, which inform about port status.
Caption
Color
State
Description
PWR
Green
Blinking
On
Fast blinking
Router is ready
Starting of the router
Updating firmware
DAT
Red
Blinking
Communication in progress on radio channel
WAN
Yellow
1x flash per second
2x flash per second
3x flash per second
Signal strength is from –50 dBm to –69 dBm
Signal strength is from –70 dBm to –89 dBm or differ-
ence between neighbours cells is exactly 3 dBm
Signal strength is from –90 dBm to –113 dBm or differ-
ence between neighbours cells is smaller than 3 dBm
USR
Yellow
Function selected by user
OUT
Green
On
Binary output active
IN
Green
On
Binary input active
ETH
Green
On
Off
Selected 100 Mbit/s
Selected 10 Mbit/s
ETH
Yellow
On
Blinking
Off
The network cable is connected
Data transmission
The network cable is not connected
PORT
Green
Depends on the expansion port (see user’s guide of used port)
PORT
Yellow
Depends on the expansion port (see user’s guide of used port)
SIM1
Yellow
On
SIM card 1 is active
SIM2
Yellow
On
SIM card 2 is active
Table 7: Router status indication
State indication of WAN LED is updated every 10 seconds.
14
12-02-21
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www
.lucom.de