manualshive.com logo in svg

Advantech RISC Module SOM-A2552, User Manual, Page: 11 / 40

Share
Download
Advantech RISC Module SOM-A2552 User Manual Download Page 11

Your ePlatform Partner 

  User’s Manual for Advantech SOM-A2552 series module V1.00 

                                                  

 

 

11 

Audio Codec 

AC’97 codec on board, support  

Microphone-in, Line-in, Line-out 

Speaker-out 

Yes 

Buzzer control 

Yes 

- 

SM Bus Interface 

Yes 

- 

System Reset 

H/W Reset, S/W Reset, 

Suspend/Wake Up I/F 

- 

Power input   

3.3V/5V 

- 

Operating temperature 

0~60

℃

 

Optional for -10~60

 &   

℃

-20~80

℃

 

Operating humidity 

0%~90% relative humidity 

- 

Certification 

FCC/CE 

- 

Form factor 

68mm*68mm*6.8mm 

- 

Ps.. “Reconfiguration Option” column provide users many choices. “-“means 
no option. If standard product SOM-A2552-440B0’s spec. doesn’t fit user’s 
requirement, user could contact with Advantech for SOM-A2552 
reconfiguration.   

* Advantech SOM-A255x series have wide temperature products. About detail product 
information, user could visit website 

http://www.advantech.com.tw/epc/phoenix/

 . User also 

could contact with 

[email protected]

 or advantech regional sales for further 

information. 

 

SOM-A2552-440B0 is off-the-shelf standard product. Advantech welcome 

SOM-A2552 re-configuration demand. Users could base on the column of 
SOM-A2552 spec. to re-configurate userized SOM-A2552.  “Reconfiguration 
Option” column provide users many choices. “-“means no option. If standard 
product SOM-A2552-440B0’s spec. doesn’t fit user’s requirement, user could 
contact with Advantech for SOM-A2552 reconfiguration.   

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for RISC Module SOM-A2552









































Reviews:

No comments