Advantech PWS-440, User Manual

Page: 2 / 52

PWS-440 User Manual ii
About This Manual
This manual explains how to install, operate and maintain the PWS-440 Military PDA.
No part of this publication may be reproduced or used in any form, or by any electri-
cal or mechanical means, without permission in writing from the manufacturer. This
includes electronic or mechanical means, such as photocopying, recording, or infor-
mation storage and retrieval systems. The material in this manual is subject to
change without notice.
Advantech has many years experience in designing computers to meet severe envi-
ronmental applications. These applications include those found by military as well as
industrial users. The PWS-440 has been designed to comply with the relevant
requirements of MIL-STD-810G, MIL-STD-461E and IP67. These include EMC, EMI,
temperature, Shock, vibration, humidity, dust and water. In addition the PWS-440 has
been developed to be reliable under all operational conditions that may be encoun-
tered by military services throughout the world.
© Copyright 2013 Advantech Co., Ltd. All rights reserved.
Bluetooth is a registered trademark of Bluetooth SIG.
Microsoft, Windows and ActiveSync are either registered trademarks or trademarks
of Microsoft Corporation.
Other product names mentioned in this manual may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
Regulatory Compliance Statements
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
CAUTION! Exposure to Radio Frequency Radiation. The radiated output power of
this device is far below the FCC radio frequency exposure limits. Nevertheless, the
device shall be used in such a manner that the potential for human contact during
normal operation is minimized. When connecting an external antenna to the device,
the antenna shall be placed in such a manner to minimize the potential for human
contact during normal operation. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall not be
less than 20cm (8 inches) during normal operation.
Part No.
2008044000
Edition 1
Printed in Taiwan July 2013