PPC-4211W User Manual
10
2.4
Installing the HDD
1.
Follow the procedures in Section 2.3 to open the rear cover and remove the
screws as indicated in the red circles in Fig 2.13.
2.
Remove the HDD bracket from the strength-plate. (See Fig 2.14 and Fig 2.15)
3.
Install the HDD (see Fig 2.16 and Fig 2.17), and take out the 4 screws from the
accessory box to fix the HDD and then fix the strength-plate (8 screws will be
needed if using two HDDs).
4.
Lock the HDD bracket, and connect the HDD cable to the mainboard. (See Fig
2.18)
Figure 2.13
Figure 2.14
Figure 2.15
Figure 2.16
Figure 2.17
Figure 2.18
